User manual

Page 16 of 21 Scorpion™ BLU User Manual (Rev. 6)
Master/Slave Mode
This mode allows a single Scorpion™ BLU product
(the “master”) to control the
actions of one or more Scorpion™ BLU units (the “slaves”) without the need of a DMX
controller. The master unit will be set to operate in either Automatic, Sound, or Laser
Sky mo
de, while the slave units will be set to operate in Slave Mode. Once set and
connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until SLA shows blinking on the display.
2. Press <ENT> (SLA will show solid on the display).
3. Connect the DMX input of the first slave unit to the DMX output of the master
unit
4. Connect the DMX input of the subsequent slave units to the DMX output of
the previous slave unit.
5. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either, Automatic, Laser Sky, or Sound
mode, as previously indicated.
2. Make the master unit the first unit in the DMX daisy chain.
• Wait until all the slave units are configured and connected before
connecting the master unit to the DMX daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave
operation because it may interfere with the signals from the master unit.
Do not connect more than 31 slave units to the master unit.
DMX Channel Assignments and Values
Channel Function Value Setting
1 Control Mode
000  027
028  139
140  251
252  255
Manual mode
Automatic
Sound activated
DMX mode
2
Pattern selection
(Only if CH1 = 000~017)
000  255 32 patterns, as shown in page 20
3 Laser On/Off
000  024
025  255
Blackout
Laser On
4 Strobe
000  004
005  255
No strobe
Strobe on (slow  fast)
5 Zoom
000  127
128  169
170  209
210  255
100%~5%
Zoom In Macro
Zoom Out Macro
Zoom In and Out Macro
6 X-Axis Move (Pan)
000  127
128  191
192  255
128 different positions on Y-Axis
Move Left to right to Left (slow  fast)
Move Left to right to Left (fast  slow)
7 Y-Axis Move (Tilt)
000  127
128  191
192  255
128 different positions on X-Axis
Move Up to down to Up (slow  fast)
Move Up to down to Up (fast  slow)
8 X-Axis Roll
000  127
128  191
192  255
Y-Axis Roll
Roll (slow  fast)
Roll (fast  slow)
9 Y-Axis Roll
000  127
128  191
192  255
Y-Axis Roll
Roll (slow  fast)
Roll (fast  slow)
10 Rotate
000  127
128  191
192  255
Z-Axis Roll
Clockwise Rotate
Counterclockwise Rotate