User's Manual

Page 11 of 22
WELL Panel User Manual Rev. 2
Operation
Configuration (DMX)
Use control configurations to operate the product with a DMX controller. For information on how to
configure wireless DMX, see Wireless Operation
.
Control Personalities
This setting allows you to choose a particular control personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (see table below).
Starting Address
Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.
1. Go to the DMX Address main level.
2. Select the starting address (001–510).
The highest recommended starting address for each DMX mode is as follows:
Color Temperature Chart
Personality Channels
21Ch 21
13Ch 13
12Ch 12
8Ch 8
4Ch 4
• See the Starting Address
section for the highest starting address you can select
for each personality.
• Make sure that the starting addresses on the various products do not overlap due
to the new personality setting.
Personality Address
21Ch 492
13Ch 500
12Ch 501
8Ch 505
4Ch 509
DMX Value Display Readout
000  005 --
006  025 2800K
026  050 3200K
051  075 3500K
076  100 4000K
101  125 4500K
126  150 5000K
151  175 5600K
176  200 6000K
201  225 6500K
226  255 --