User Manual

Intimidator™ Wave 360 IRC User Manual Rev. 2 Page 9 of 33
Mounting
Before mounting the product
, read and follow the safety recommendations indicated in
the Safety Notes. For our CHAUVET® line of mounting
clamps, go to
www.chauvetlighting.com/cables-clamps-main.html/.
Orientation
The Intimidator™ Wave 360 IRC may be mounted in any
position; however, make sure
adequate ventilation is provided around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the Technical Specifications).
• When mounting the product overhead, always use a safety cable (such as CH-05
from Chauvet). Mount the product securely to a rigging point, such as
an elevated
platform or a truss.
• When rigging the product onto a truss, you should use mounting clamps
(such as
CLP-15 from Chauvet) of appropriate weight capacity. The bracket has 13-mm
holes, which are appropriate for this purpose.
• When power linking multiple products, you mu+st
always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
• The mounting bracket also allows for surface mounting. When mounting the product
on the floor, make sure that the product and cables are a
way from people and
vehicles.
Mounting Diagram
When using only one mounting clamp with this fixture, you must use a clamp with a
captive bolt to prevent accidental loosening.
Safety
Cable
Bracket
Attachment
Plate x2
Rubber Feet
(x4) for floor
mounting