User Manual

Page 28 of 33 Intimidator™ Wave 360 IRC User Manual Rev. 2
Display Blackout
and Reverse
You can flip the LED display for easy readability in any mounting situation
or blackout
the display entirely.
To select your display angle:
1. Press <MENU> and use the <UP> or <DOWN> buttons to select Setup.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Screen Rev.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select ON or OFF.
6. Press <ENTER>.
To select blackout display:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Display and press <ENTER>.
5. Use <UP> or <DOWN> to select ON or OFF and press <ENTER>.
Dimmer Curve
To set the dimmer curve on the Intimidator™ Wave 360 IRC, do the following:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dimmer Curve.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Linear, SCurve, I Squa, or Square.
7. Press <ENTER>.
Dimmer Speed
To set the dimmer speed on the Intimidator™ Wave 360 IRC, do the following:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dimmer Speed.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Smooth or Fast.
7. Press <ENTER>.
Reset
Software
To reset the software on the Intimidator™ Wave 360 IRC, do the following:
1. Press <MENU> and use the <UP> or <DOWN> buttons to select Setup.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Reset.
4. Press <ENTER>. The product will reset all settings in the software.
Factory
Defaults
To load the factory defaults on the Intimidator™ Wave 360 IRC, do the following:
1. Press <MENU> and use the <UP> or <DOWN> buttons to select Setup.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Factory Reset.
4. Press <ENTER>. The product resets to factory default settings.