User Manual

Intimidator™ Wave 360 IRC User Manual Rev. 2 Page 27 of 33
Manual Reverse
Pan Operation
To select whether you want the Intimidator™ Wave 360 IRC to operate with normal pan
or inverted (reverse) pan, do the following.
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
Manual Reverse
Tilt Operation
To select whether you want the Intimidator™ Wave 360 IRC to operate with normal tilt or
inverted (reverse) tilt, do the following.
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
Manual Pan
Angle
Range
To select the range for the pan angles on the Intimidator™ Wave 360
IRC, do the
following:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 180 (180°), 360 (360°), or 540 (540°).
7. Press <ENTER>.
Manual
Tilt Angle
Range
To select the range for the tilt angles on the Intimidator™ Wave 360 IRC
, do the
following:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 90 (90°), 180 (180°), or 270 (270°).
7. Press <ENTER>.