User Manual

Page 26 of 33 Intimidator™ Wave 360 IRC User Manual Rev. 2
Configuration
(Standalone)
Set the product in one of the standalone modes to control it without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (
Static,
Automatic, or Sound-Active)
to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals tha
t could interfere with
the DMX signals from the controller.
Sound-Active
Mode
To enable the Sound-Active mode, do the following:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sound.
5. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity
To raise or lower the sound sensitivity of the Intimidator™ Wave 360 IRC
, follow the
instructions below:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sensitivity.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 1–100.
7. Press <ENTER>.
Automatic Mode
To enable the Automatic mode, do the following:
1. Press <MENU>.
2. Use the <UP> or <DOWN> buttons to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Auto.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to scroll through the auto programs (1–16).
7. Press <ENTER> to make your selection.
Auto Program
Sweep Angle
Color
Movement
1
180°
All
Wave, alternate & synchronized
2
90° Front
Chase
Wave
3
180°
Chase
Wave
4
45° Front
Chase
Wave
5
90° Up
Chase
Wave
6
45° Back
Chase
Wave
7
90° Back
Chase
Wave
8
90° Front
1 & 2 color scroll
Synchronized
9
180°
1 & 2 color scroll
Synchronized
10
45° Front
1 & 2 color scroll
Synchronized
11
90° Up
1 & 2 color scroll
Synchronized
12
90° Back
4 color scroll
Synchronized
13
90° Back
All
Synchronized
14
90° Front
1 color scroll
Alternate
15
180°
1 color scroll
Alternate
16
45° Front
1 & 2 color scroll
Alternate