User Manual
TABLE OF CONTENTS 1. Before You Begin ................................................................................................................ 4 What is Included .................................................................................................................................................. 4 Unpacking Instructions ......................................................................................................................................... 4 Claims .......................
Product Maintenance .........................................................................................................................................24 6. Technical Specifications .................................................................................................. 25 Returns................................................................................................................................... 26 Contact Us ....................................................................
1. BEFORE YOU BEGIN What is Included Unpacking Instructions Claims Text Conventions • • Power Cord Warranty Card Quick Reference Guide Carefully unpack the product immediately and check that all the parts are in the package and are in good condition. If the box or any of the contents appear damaged from shipping, or show signs of mishandling, save all packaging and file a claim with the carrier immediately, do not notify Chauvet.
Product at a Glance Use on Dimmer Outdoor Use Sound-Activated DMX Master/Slave Safety Notes x x P P P Auto Programs Auto-ranging Power Supply Replaceable Fuse User-Serviceable P P P x These notes include important information about the mounting, use, and maintenance of this product. Read these notes before using the product. • • • • • • • • • • • • • • • • • • • • • • Always connect the product to a grounded circuit to avoid the risk of electrocution.
2. INTRODUCTION Overview Safety Cable Pass-Through Fuse Holder DMX In/Out Power Out Power In Back Panel View Mirror Adjustable Lens Display IR Sensor LED Indicator Menu Buttons Front View (Scan) Front View (Barrel) Intimidator Scan/Barrel 305 IRC User Manual Rev.
Dimensions 10 in 255 mm 6.7 in 171 mm 18.9 in 480 mm Barrel 10 in 255 mm 16.9 in 430 mm Scan Intimidator Scan/Barrel 305 IRC User Manual Rev. 1 5.
3. SETUP AC Power The Intimidator Scan/Barrel 305 IRC have auto-ranging power supplies that work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the values listed on the label affixed to the product’s back panel, or refer to the product’s Specifications. The listed current rating indicates the product’s average current draw under normal conditions.
Power Linking The product provides power linking via the Edison/IEC outlet located in the back of the unit. Power Linking Diagram st 1 Product nd 2 Product rd 3 Product Additional Products Up to 5 Intimidator Scan/Barrel 305 IRC units can be linked on 120 V, or up to 12 Intimidator Scan/Barrel 305 IRC units on 230 V.
Mounting Before mounting the product, read and follow the safety recommendations in the Safety Notes section. Orientation The Intimidator Scan/Barrel 305 IRC can be mounted in any position, but make sure the placement allows adequate ventilation for the product, and allows for movement of the yoke and head in any direction. Rigging Be sure to place the product in a location that allows easy access to it for maintenance and programming, and enough space around the product for ventilation.
4. OPERATION Control Panel Description The control panel is used to set the operating mode, and the configuration settings of the product. Use the 4 buttons underneath the LCD display to access the control panel and navigate the menu map. For specific instructions see the Configurations sections below.
Menu Value OFF Normal pan operation ON Reverse pan operation OFF Normal tilt operation ON Reverse tilt operation Screen Reverse OFF Normal display ON Upside-down display Sensitivity 001—100 Sets sound sensitivity Pan Reverse Tilt Reverse Setup Description Reset Factory Set Sys Info Ver: VX.X Running Mode: XXXX DMX Address: XXX Temperature: XXX Intimidator Scan/Barrel 305 IRC User Manual Rev.
Configuration (DMX) To set the product in DMX mode for control with a DMX controller, do the following: 1. Make sure the product is plugged into a power source. 2. Connect the male end of a DMX cable to the DMX out socket of the DMX controller and the female end of the same cable to the DMX in socket on the product. 3. Set the DMX starting address and personality by following the directions below.
DMX Channel The following table outlines all the capabilities of the Intimidator Scan/ Barrel 305 IRC and Assignments and the channels that control them when the light is used with a lighting controller.
11-CH Channel 6 Function Dimmer Value Percent/Setting 000 ó 255 0 to 100% 000 ó 007 Open 008 ó 015 Gobo 1 (glass) 016 ó 023 Gobo 2 (glass) 024 ó 031 Gobo 3 032 ó 039 Gobo 4 040 ó 047 Gobo 5 048 ó 055 Gobo 6 7 Gobo Wheel 056 ó 063 Gobo 7 064 ó 071 Gobo 7 shake, fast to slow 072 ó 079 Gobo 6 shake, fast to slow 080 ó 087 Gobo 5 shake, fast to slow 088 ó 095 Gobo 4 shake, fast to slow 096 ó 103 Gobo 3 shake, fast to slow 104 ó 111 Gobo 2 (glass) shake, fast to slow 112 ó 119 Gobo 1 (glass) shake, fast
11-CH Channel Function Value Percent/Setting 000 ó 007 No function 008 ó 015 Pan/tilt move-in-black 016 ó 023 Pan/tilt move-in-black (disable) 024 ó 031 Color wheel move-in-black 032 ó 039 Gobo wheel move-in-black (disable) 040 ó 047 Gobo wheel move-in-black 048 ó 055 Color wheel and Gobo wheel move-in-black (disable) 056 ó 063 Fast movement 064 ó 087 Fast movement (disable) 10 Operating Mode 088 ó 095 All movement move-in-black (disable) 096 ó 103 Reset pan/tilt 104 ó 111 No function 112 ó 119 Res
7CH Channel 1 Function Value Pan 000 ó 255 0 to 180° Tilt (Scan) 000 ó 255 0 to 90° Percent/Setting 000 ó 019 Stop 2 Tilt (Barrel) 020 ó 135 Clockwise rotation (slow to fast) 136 ó 139 Stop 140 ó 255 Counter-clockwise rotation (slow to fast) 000 ó 006 Open (white) 007 ó 013 Yellow 014 ó 020 Purple 021 ó 027 Green 028 ó 034 Red 035 ó 041 Light Blue 042 ó 048 Kelly Green 049 ó 055 Orange 056 ó 063 Dark Blue 3 Color 064 ó 070 White + Yellow (split colors) 071 ó 077 Yellow + Purple (split colors)
7CH Channel Function Value Percent/Setting 000 ó 007 Open 008 ó 015 Gobo 1 (glass) 016 ó 023 Gobo 2 (glass) 024 ó 031 Gobo 3 032 ó 039 Gobo 4 040 ó 047 Gobo 5 048 ó 055 Gobo 6 5 Gobo Wheel 056 ó 063 Gobo 7 064 ó 071 Gobo 7 shake, fast to slow 072 ó 079 Gobo 6 shake, fast to slow 080 ó 087 Gobo 5 shake, fast to slow 088 ó 095 Gobo 4 shake, fast to slow 096 ó 103 Gobo 3 shake, fast to slow 104 ó 111 Gobo 2 (glass) shake, fast to slow 112 ó 119 Gobo 1 (glass) shake, fast to slow 120 ó 127 Open 128 ó 191
Configuration (Standalone) Use standalone configurations to operate the product without a DMX controller. Never connect a product operating in a standalone mode (Sound, Auto, or IR) to a DMX chain that includes a DMX controller. Products in standalone mode can transmit DMX signals that interfere with the DMX signals from the controller Sound Mode Sound mode sets the product to respond to sounds and music. To set the product to Sound mode, do the following: 1.
Configuration (Settings) The Intimidator Scan/Barrel 305 IRC can be customized with settings such as pan direction, screen orientation, and sound sensitivity. Below are instructions for configuring all the settings available. Pan Reverse Reversing the pan movement is useful when 2 lights are facing each other and they both need to turn toward the same direction. To reverse the pan movement do the following: 1. Press
Reset Resetting will restart the product. It does not change any settings. Resetting is a helpful troubleshooting tool, and can be used if the product has stopped responding to control, or if the control system has suffered a failure. To reset the product, do the following: 1. Press
IR Mode IR mode allows the product to be controlled with an infrared remote controller. The IRC-6 can remotely set the product to various modes; adjust the color, speed and sensitivity; and set the strobe. To set the product to IR mode, do the following: Make sure the product is plugged into a power source and not connected to a DMX cable. 1. Press
Configuration (Master/Slave) Master/Slave mode allows a single Intimidator Scan/Barrel 305 IRC (the master) to control the actions of one or more Intimidator Scan/Barrel 305 IRCs (the slaves) without a DMX controller. In Master/Slave mode the master is set to operate in Auto mode, Sound mode, or IR mode and the slaves are set to operate in Slave mode. The master and slaves are daisy chained though the DMX input and output ports with the master at the beginning of the chain.
5. TECHNICAL INFORMATION Product Maintenance Dust build-up on the lens reduces light output. Dust build-up on the body and fans can cause overheating and mechanical wear, which can reduce the usable life of the product. To maintain optimum performance and minimal wear in a normal environment, clean the product at least twice a month. If the environment is particularly dusty, clean the product more often. For best results follow the suggestions listed below: 1.
6. TECHNICAL SPECIFICATIONS Dimensions and Weight Length (Scan) Width (Scan) Height (Scan) Weight (Scan) 16.9 in (430 mm) Length (Barrel) 10 in (255 mm) Width (Barrel) 5.7 in (147 mm) Height (Barrel) 10 lb (4.6 kg) Weight (Barrel) 18.9 in (480 mm) 10 in (255 mm) 6.7 in (171 mm) Note: Dimensions in inches are rounded to the nearest decimal digit Power 10.4 lb (4.
RETURNS In case you need to get support or return a product: • If you are located in the U.S., contact Chauvet World Headquarters. • If you are located in the UK or Ireland, contact Chauvet Europe Ltd. • If you are located in Mexico, contact Chauvet Mexico. • If you are located in Benelux, contact Chauvet Europe BVBA. • If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetlighting.com for distributors outside the U.S.
CONTACT US USA WORLD HEADQUARTERS General Information Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084 Technical Support Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com World Wide Web www.chauvetlighting.com EUROPE.
