User's Guide

① On Power OFF mode,
② Place two units to pair close to each other
③ Press and hold POWER button (A) for 8 seconds until the LED turns and
flashes in Red and Blue.
④ And then, Choose EITHER OF THEM and short press the Power button
(A) to pair
★ MAKE SURE you only choose one device to press a power button
between two devices.
⑤ After completion of the pairing, slow Blue LED flashes twice regularly
with a beep sound.
Exit Intercom Mode : Intercom paired units remained idle for 1 Minute will
automatically be switched over to a Standby Mode.
Intercom Connection : Short press POWER Button (A)
Intercom Disconnection : Short press POWER Button (A)
10. UNIVERSAL INTERCOM
Universal Intercom Pairing
① On Power OFF mode,
② Place your BiT unit close to a Non-ChatterBox product
③ Press and hold POWER button (A) of BiT unit for 8 seconds until
the LED turns and flashes in Red and Blue.
④ And then, double press the POWER button (A) to pair
⑤ Turn on the Non-ChatterBox product to set into its pairing mode
⑥ After completion, slow Blue LED flashes twice regularly with a beep
sound.
Universal Intercom Connection : Double press POWER Button (A)
Universal Intercom Disconnection : Double press POWER Button (A)
11. LANGUAGE
Language Setting :
① Long press POWER button (A) for 8 seconds
② Short press PLUS (D) + MINUS (E) button simultaneously for 1 second
Language up : short press PLUS button (D)