User's Guide

Please keep in mind that you need to mount the speakers in a location
that is directly next to your ears.
④ Attach the right speaker (with the longer wire) to the corresponding
Velcro disk that you applied on the helmet liner. Attach the left speaker
(with the shorter wire) to the other Velcro disk. For helmets with speaker
pockets, simply insert the speakers in each corresponding pocket.
(2) MIAN UNIT AND CRADLE
① Unscrew the cradle and let the cradle snuggle up to the bottom
left side of the helmet.
② Fasten the mounting bracket by using the bolts supplied.
③ Make sure that the back side of the Unit is aligned with the
grooves on the mounting bracket.
④ Slide the BiT-3 unit down on the mounting bracket until it
latches firmly into the place.
3. BUTTONS AND INPUTS
BUTTONS & INPUTS
A
POWER Button
B
USB port
C
MAIN FUNCTION Button
D
PLUS Button
E
MINUS Button
4. BASIC FUNCTION
⚫ Power ON : Long press POWER button(A) for 3 seconds
⚫ Power OFF: Long press POWER button(A)for 6 seconds
⚫ Volume up : Short press PLUS button(D)
⚫ Volume down : Short press MINUS button (E)
⚫ Automatic power-off : As no-operation is running for 60 minutes,
the unit is automatically turned off to prevent self-discharge