User's Guide

ManualsBrandsChatterBox ManualsAudio EquipmentBluetooth Helmet Headset

BiT-3 Headset User Guide

Please read the instructions before use

Designs and Features are subject to change for improvement

1. GETTING STARTED

⚫ Main Feature

⚫ Package Contents

⚫ Battery and Battery charging

2. INSTALLATION

⚫ Installation Microphone & Speaker

⚫ Installation Unit & Cradle

3. BUTTONS AND INPUTS

4. BASIC FUNCTION

⚫ Power On / Off

⚫ Volume Up / Down

⚫ Audio-Power-Off

5. MOBILE PHONE CONNECTION

⚫ First Mobile Pairing

⚫ Second Mobile Pairing

⚫ New Mobile Replacement

6. PHONE

⚫ Answer

⚫ Put on hold

⚫ Reject

⚫ Hang up

⚫ Voice calling

⚫ Last number redial

⚫ Automatic answer call

⚫ Audio Transfer

⚫ Put the current call on hold, Answer an incoming call

⚫ Hang up the current call, Answer an incoming call

⚫ Put the current call on hold, Reject an incoming call

⚫ Switch to the other phone

⚫ Switch to the music

7. MUSIC

⚫ Enter Music Mode / Exit Music Mode

⚫ Music Play / Stop / Mute

⚫ Fast Forward/ Rewind

8. VOX

⚫ VOX ON

⚫ VOX sensitivity control / OFF

9. INTERCOM

⚫ Intercom pairing

⚫ Intercom connection / disconnection

Summary of content (13 pages)

PAGE 1
BiT-3 Headset User Guide Please read the instructions before use Designs and Features are subject to change for improvement 1. 2.
PAGE 2
10. UNIVERSAL INTERCOM ⚫ Intercom pairing ⚫ Intercom connection / disconnection 11. LANGUAGE ⚫ Language setting 1. GETTING STARTED Thank you for choosing our ChatterBox BiT-3, Motorcycle Bluetooth Intercom Headset (1) Main Feature 12. FM RADIO ⚫ Radio on/off/mute ✓ Bluetooth V 4.1 ⚫ Channel up/down ✓ 1:1 Intercom Max up to 400M ⚫ Saved channel up/down ✓ Universal Intercom with Non-ChatterBox unit ✓ FM Radio 13.
PAGE 3
④ Velcro speaker disks, foam microphone-covers, microphone Velcro ⚫ sticker Store the battery at the temperatures of -20°C ~+50°C / 4°F~+122°F. Higher or lower temperatures may reduce the capacity ⑤ Helmet Mounting bracket with Cradle, 2 Screws and Allen Wrench and life of the battery or may cause temporary non-operation. ⑥ Manual and ChatterBox logo sticker ⚫ Do not use the product in sub-zero temperature, because it may cause serious reduction of the battery performance.
PAGE 4
Please keep in mind that you need to mount the speakers in a location ④ Slide the BiT-3 unit down on the mounting bracket until it that is directly next to your ears. latches firmly into the place. ④ Attach the right speaker (with the longer wire) to the corresponding Velcro disk that you applied on the helmet liner. Attach the left speaker 3. BUTTONS AND INPUTS (with the shorter wire) to the other Velcro disk. For helmets with speaker pockets, simply insert the speakers in each corresponding pocket.
PAGE 5
(2) Second Mobile-Phone Pairing 5. MOBILE PHONE CONNECTION ① After pairing of the first phone, please make sure to turn off the BiT-3 unit and the Bluetooth function of the first phone. (1) Mobile Phone Pairing : ① On power off mode : ② Press and hold POWER button (A) for 8 seconds until the LED turns and flashes in Red and Blue. ③ Turn on a Bluetooth function in your phone and search and select the name of the unit (ChatterBox BiT-3 V 2.
PAGE 6
⑤ After completion of the pairing, slow Blue-LED flashes twice regularly with a beep sound. Automatic Answer Call : Incoming calls remained idle for more than 20 ⑥ As phone pairing is finished, turn the power off and on again to prevent a sudden volume increase.
PAGE 7
★To shift function from the first mobile-phone to the Second mobilephone and vice versa, long Press Main Function Button for 2.5 seconds. VOX 1 ( Sensitive ) ★For a certain type of Mobile-phone, music volume can be : Press PLUS + MINUS button at the same time for 5 seconds. simultaneously controlled or separately controlled. VOX 2 ( Average Sensitive ) : Press PLUS + MINUS button at the same time for 5 seconds. 7.
PAGE 8
① On Power OFF mode, ① On Power OFF mode, ② Place two units to pair close to each other ② Place your BiT unit close to a Non-ChatterBox product ③ Press and hold POWER button (A) for 8 seconds until the LED turns and ③ Press and hold POWER button (A) of BiT unit for 8 seconds until flashes in Red and Blue. the LED turns and flashes in Red and Blue.
PAGE 9
Language down : short press MINUS button (E) Save selected language : Short press MAIN FUNCTION button (C) 12.
PAGE 10
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. ◼ ignitions ◼ Store the product at the temperature of -20°C ~+50°C.
PAGE 11
◼ ◼ Prolonged exposure to a loud noise may damage your eardrum and first purchase was made.
PAGE 12
Case 1: If you paired only one phone with the unit, just pair the second mobile phone Case 2: If you already paired two mobile phones with the units and try to replace one of them, turn off the previously paired two mobile phones’ FAQ : Frequently Asked Questions Q: Why is there a little delay in the Music play mode? A: For certain types of mobile-Phones, there could be a little delay in the Music play mode.
PAGE 13
A: If there is no operation for 60 minutes, the power is off automatically to save the battery. To get out of the power saving mode, just press any button you see. Q: What does the Purple LED mean? A: When Red and Blue LED are overlapped, you can see the purple LED. But the purple LED has nothing to do with functions. 18.09.