User's Manual

(3) VOX SET UP
VOX is a function to answer an incoming phone call by using loud voice or shouting without using
any button. (As a phone rings, taking no action would lead to an automatic answer in 20 seconds)
① After hearing Voice prompt of “VOX”, short press the FUNCTION BUTTON to enter. [Voice
Prompt: “VOX”].
② Press the PLUS or MINUS BUTTON to search a
VOX sensitivity you desire and then, short
press the FUNCTION BUTTON to save.
VOX sensitivity in order: VOX0 -> VOX1 -> VOX2 -> VOX3 -> VOX0
VOX 0: VOX off - disables VOX function.
VOX 1: Highly sensitive. (There is a risk of V OX operating even by small noise.)
VOX 2: Normal sensitive. (Factory default setting)
VOX 3: Less sensitive. (Loud voice is required)
(4) SIDE TONE ON / OFF
① After hearing Voice prompt of “Mic”, short press the FUNCTION BUTTON to enter.
[Voice Prompt: “Mic”].
② Press the PLUS or MINUS BUTTON to search ON or OFF state and then, short press the
FUNCTION BUTTON to save.
(5) RESET
① After hearing Voice prompt of “Reset”, short press the FUNCTION BUTTON to save. [Voice
Prompt: “Reset”].
(6) EXIT
① After hearing Voice prompt of “Exit”, short press the FUNCTION BUTTON to save. [Voice
Prompt: “Exit”].
14. RESET