User's Manual

1:1 Intercom Pairing
① Place two devices to pair close to each other.
② Long press INTERCOM BUTTONs of both devices for 3 seconds until the LED flashes in red and
blue alternately. [Voice Prompt: “Pairing”]
③ Short press INTERCOM BUTTON of the device to be set as a Master. [Voice Prompt: “Intercom
Pairing”] Then, Red LED flashes fast to enter pairing mode.
④ As pairing is completed, the Green LED flashes.
※ As your device is already connected with one device, in case that you wish to pair with another
device, press INTERCOM BUTTON for 6 seconds.
1:1 Intercom Connection / Disconnection:
To connect: Short press POWER BUTTON [Voice Prompt: “Intercom 1 connected”]
To disconnect: Short press POWER BUTTON
[Voice Prompt: “Intercom 1 disconnected”]
※ Even if 1:1 Intercom communication is interrupted by a phone call, the Intercom communication
can stay in connection with diminished sound. After hanging up the phone call, Intercom volume
comes back to normal sound level.
※ During 1:1 Intercom conversation, changing the saved FM radio channels, Redial last number, and
voice command function can not be operated.
4 Riders Multi-Intercom Pairing
① Place two devices to pair close to each other.
② Long press INTERCOM BUTTONs of both devices for 3 seconds until the LED flashes in Red
and Blue alternately. [Voice Prompt: “Pairing"]
③ Double press INTERCOM BUTTON of the device to be set as a Master. [Voice Prompt :
“Group Pairing”] Then, Blue LED flashes fast to enter multi pairing mode.
④ As pairing is completed, a Green LED flashes. [Voice Prompt : “Connected 1(numbers of other
devices connected to your device) / Connected 2(numbers of other devices connected to your
device)”]