User's Manual

recognition function of your Smart-phone is activated.
5. SMART-PHONE CONNECTION
Smart-phone Pairing
① Make sure your BiT-4 device is powered off.
② Press and hold POWER BUTTON for
8 seconds until the LED turns and flashes in Red and Blue
alternately.
[Voice Prompt: “Bluetooth pairing”]
③ Turn on the Bluetooth function in your Smart-phone and search and select the name of the
device (ChatterBox BiT-4 Vxx)
④ Certain Smart-phones may require a password <Password: 0000>
⑤ After pairing is completed, the Blue LED slowly flashes in every 2 seconds. [Voice Prompt:
“Bluetooth Connected”]
⑥
After pairing is finished, turn the power off and then turn on the device again in order to prevent
a sudden volume increase.
※NOTE for iPhone users: After the pairing is done, please set the device at the minimum volume
level to prevent sudden volume increase. (Delete)
Second Smart-phone pairing
Pairing sequence is exactly the same as the first Smart-phone pairing.
※CAUTION: Please make sure that you turn off the Bluetooth function of the first
paired-Smart-phone before starting the second Smart-phone pairing.
New Smart-phone (the third phone) replacement
① Turn off one of the previously paired Smart-phones’Bluetooth functions or delete the paired
device's name (ChatterBox BiT-4 Vxx) from the connected Bluetooth device list in the
Smart-phone set up menu.
② Pairing sequence is exactly the same as the first Smart-phone pairing.
6. MODE CHANGE
Music Mode: