Owner's manual

PowerS c o p e U s e r Manual R e v . X1 Augus t 1 , 20 0 9
7
Picture 4: Communication Ports
Ethernet Port: to be used with Standard CAT-5/6 Ethernet cable: male RJ-45 both ends.
(Order separately. Cable not provided.)
SERIAL Port: to be used with CPI Serial cable: male RJ-45 on the Scope end and
female DB-9 on the host end. (Order separately, CPI P/N 35941-131)
Environmental Port: to be used with the CPI Temperature and Humidity Sensor: male
RJ-11 on the Scope end and the Temperature and Humidity Probe at the other end.
(Order separately, CPI P/N 35941-132)
Software
Internal software has been pre-installed.
Software to set up and monitor the PowerScope via the SERIAL Port is in the enclosed
CD.