Manual

CPI PDU User Manual Rev. 10.0. June 28, 2010
21
• A description of each input field on the PDU Configuration screen is listed below:
PDU Name: Name assigned to this PDU, the maximum number of characters that
can be entered is less than 32.
PDU IP Address: Contains the assigned IP address for the PDU in the form of
xxx.xxx.xxx.xxx, where xxx is a number from 1 to 254. This field is not required if the
AutoIP checkbox is checked.
Subnet Mask: Contains the network masking bits for the PDU in the form of
xxx.xxx.xxx.xxx, where xxx is usually 255 or 0 to designate a bit pattern that masks
in the network address portion of the IP address. These values depend on the
network class of the assigned IP address.
Gateway: Contains the IP address of the network’s gateway PDU in the form of
xxx.xxx.xxx.xxx, where xxx is a number from 1 to 254.
DHCP checkbox: Check to use a dynamic IP address assigned by a DHCP server
instead of the static IP assigned in the PDU IP Address field.
WEB Enabled checkbox: Check to allow access to the PDU using a web browser.
This box should always be checked.
SW Update checkbox: Check to allow software updates.
Login User Name/Password: There are four login user accounts for PDUs that are
accessed using a Java-capable web browser. Enter up to four user names and
passwords. The default account is admin, admin.