Technical data

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
Additional information 19
Additional information
Chatpen status indication
The lights and vibration on the Chatpen indicate the Chatpen status
(the two lights show the same status indication).
Troubleshooting
The list below presents some problems that might arise when you are
using the Chatpen, and what to do in the different situations.
Pairing
• The light is green when connecting the charger, cap off (pairing
the first time)
The Chatpen is already paired with a device. Master reset your
Chatpen. See “Master reset” on page 17.
Light Chatpen status
Off The Chatpen is turned off or the battery
is discharged.
Green – steady The Chatpen is ready to use or is registering
strokes.
Green – flashing The battery is low and needs charging.
Yellow Wait. The Chatpen is powering up, connecting
to a Bluetooth device or sending.
Red Something is wrong (strokes not registered,
unable to connect to the Bluetooth device,
hardware error).
Red/green/yellow The Chatpen is ready to pair.
Vibration Chatpen status
Short vibrations Action is performed or a service is selected.
In combination with red/green/yellow flashing,
Chatpen is ready to pair.
Constant vibration Something is wrong.