Technical data

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
Maintenance 15
Maintenance
Charging the battery
The Chatpen has a built-in rechargeable battery. Use only the
Ericsson charger that comes with the Chatpen.
When the battery power in your Chatpen is low, the light on the
Chatpen flashes green when the Chatpen is idle (cap off, not writing).
You can charge the battery with the cap on or off. You can use the
Chatpen while charging.
Anything that you wrote or drew before the battery discharged is
saved in the Chatpen.
To charge the battery
• Connect the charger to the mains and to the charging connector
on the Chatpen.
It takes about 2 hours to fully charge the battery.
When the light is steady green, the battery is fully charged.
To disconnect the charger
• Remove the charger from the mains and pull out the charger plug
from the Chatpen. You can interrupt the charging at any time.
To check the battery status
•Tick the Battery status box on page 18 with your Chatpen.
The battery status appears in the phone display.
Setting languages
You can change the language for Chatpen information in the phone
display. You can also change the language for the interpretation of
the text in the character fields on the paper.
• With your Chatpen, tick the box for the appropriate language
on page 18.
A message confirming the change appears on the phone.