Specifications

Chassis Plans CPR-30201 KVM Technical Reference
Page 32
List Hotkey Settings
To
see a listing of the current hotkey settings, do the following:
1. Invoke HSM.
2. Press and release the F4 function key.
3. Open a text editor or word processor and use its Paste function to display the settings.
USB Reset
If the USB looses focus and needs to be reset, do the following:
1. Invoke HSM.
2. Press and release the F5 function key.
Hotkey Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the following:
1. Invoke HSM.
2. Press and release the B key.
The Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the
message disappears and you automatically exit Hotkey Mode.
Disable Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]), do the following:
1. Invoke HSM.
2. Press [X] [Enter].
Note: This procedure is a toggle. To enable the Port Switching keys repeat steps 1 and 2.