Specifications

Chassis Plans CPR-30201 KVM Technical Reference
Page 31
Alternate Port Switching Keys
The port switching activation keys can be changed from tapping the Scroll Lock key twice ([Scroll Lock] [Scroll
Lock]) to tapping the Ctrl key twice. To change the port switching activation keys, do the following:
1. Invoke HSM
2. Press and release the T key
Note
: This procedure is a toggle between the two methods. To revert back to the original [Scroll Lock] [Scroll
Lock] method, invoke HSM, then press and release the T key again.
Keyboard Operating Platform
The KVMS-RGBA4 ‘s default port configuration is for a PC Compatible keyboard operating platform. If your
requirements call for different port settings (you have a Mac or Sun attached to a port, e.g.), you can change a
port’s keyboard operating platform configuration as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM
3. Press and release the appropriate Function key (
see table). After completing a setting, you
automatically exit HSM.
* The first time that the Sun system runs from a port, you must configure its port for the Sun keyboard operating
platform before you turn the system on, or else the Sun system will not start.