Specifications

Chassis Plans CPR-30201 Technical Reference
Page 13
Misc Menu
Adjustment Applicability
aRGB DVI-D CVHS CVBS
Auto Adjustment ●
Source ● ● ● ●
Sleep Time ● ● ● ●
Room Lighting ● ● ● ●
Freeze Frame ● ● ● ●
Zoom Settings (sub menu) ● ● ● ●
More Options (sub menu) ● ●
Auto Adjust Automatically adjusts the screen resolution and sync to the incoming signal.
(aRGB Source Only)
Source Selects the video input signal source (aRGB, DVI-D, S-Video, and Composite
Video).
Sleep Time Adjust (5 to 120 minutes) to set a desired time for monitor to go to sleep.
Sleep Time remaining Indicates remaining time until monitor goes to sleep (Grayed out until sleep timer is
activated.
Room Lighting Bright, Normal, Movie changes the display brightness slightly with Movie being
lowest.
Freeze Frame Retains the image on the monitor, including PIP.
Zoom Settings Menu See Below
More Options Menu See Below
Misc. Zoom Sub Menu
Adjustment Applicability
aRGB DVI-D CVHS CVBS
Zoom ● ● ● ●
Zoom H Pan ● ● ● ●
Zoom V Pan ● ● ● ●
Zoom Zooms into the center of the displayed image, including PIP. If the PIP is not
located at the center of the display, it will be zoomed off the edge and will no
longer be visible. The maximum zoom factor is approximately 16:1.
Zoom H Pan Pans the zoomed image left or right.
Zoom V Pan Pans the zoomed image up or down.
Notes:
1. Zoom H Pan and Zoom V Pan will be grayed out if Zoom is set to 0.