CPPM-8U201 Rack Mount LCD Display 20.
Warranty The product is warranted against material and manufacturing defects for two years from date of delivery. Buyer agrees that if this product proves defective Chassis Plans’ is only obligated to repair, replace or refund the purchase price of this product at Chassis Plans’ discretion.
Trademarks Liability Disclaimer IBM, PC/AT, VGA, EGA, OS/2 and PS/2 are trademarks or registered trademarks of International Business Machines Corp. Intel is a registered trademark of Intel Corporation. MS-DOS and Microsoft are registered trademarks of Microsoft Corp. All other brand and product names may be trademarks or registered trademarks of their respective companies.
Chassis Plans CPPM-8U201 Technical Reference Table of Contents Description ................................................................................................................................................ 1 Outline Drawing................................................................................................................................... 2 Part Number Matrix ........................................................................................................................
Chassis Plans CPPM-8U201 Technical Reference Description The CPPM-8U201 is a high performance rack mount 8U 20.1" TFT LCD display with native UXGA 1600 x 1200 resolution. The display offers 250nit brightness, 500:1 contrast, and 89 degree viewing angle for exceptional viewability. An anti-glare hard coating minimizes reflections making images that much clearer. The aspect ratio is 4:3 with a Pixel Pitch of only 0.255mm. It will display 16.7 million colors (True Color).
Outline Drawing Page 2 Front View 20.22 Top View 13.97 0 .86 4.36 9.61 13.
Chassis Plans CPPM-8U201 Technical Reference Part Number Matrix CPPM-8U201-TS where ‘T’ designates the Touch Screen option and ‘S’ designates Input Signals.
Chassis Plans CPPM-8U201 Technical Reference Installation To mount the CPPM-8U201 in a rack, it is first important you identify the correct holes to mount to. Please see the following illustration. Note that a ‘U’ starts between the holes that are ½” apart. One very common problem is trying to install into the wrong holes. Thus the bottom edge of the display would be placed between the holes ½” apart.
Chassis Plans CPPM-8U201 Technical Reference Connecting the Display The CPPM-8U201 provides for analog, digital, composite and S-Video video inputs as well audio input and output. Note Connector configuration is dependant on the particular model. Not all models will have all connectors.
Chassis Plans CPPM-8U201 Technical Reference Picture-In-Picture (PIP) The CPPM-8U201 with the ‘V’ controller supports PIP. The PIP window can be sized to Small (approx 1.4x2.0”), Medium (2.9x4.0”) or Large (4.3x5.6”). There are 5 preset PIP window positions or the window can be moved to a user selected position through the OSD menus. The PIP window is used to put a smaller video feed window on top of a full computer display.
Chassis Plans CPPM-8U201 Technical Reference – ‘A’ & ‘D’ Controller ‘A’ and ‘D’ Controller Description The ‘A’ controller provides for only aRGB input while the ‘D’ controller provides for both aRGB and Digital DVI-D input. The OSD menus are different than those for the ‘V’ controller which provides for aRGB, Digital, Composite and S-Video inputs. Users with the ‘V’ controller should see the next section. Front Panel Controls The On Screen Display (OSD) is adjusted as follows: 1. 2. 3. 4.
Chassis Plans CPPM-8U201 Technical Reference – ‘A’ & ‘D’ Controller To save your changes, press the front panel Menu/Select button or Auto/Exit. Alternatively, changes are saved if no buttons are pressed and the OSD times out returning back to the display. There is a Factory Reset function under the Misc Adjustments Menu (bottom left ETC symbol) should you completely screw things up and want to start over. Select the RECALL function in the Miscellaneous menu.
Chassis Plans CPPM-8U201 Technical Reference – ‘A’ & ‘D’ Controller ‘A’ and ‘D’ OSD The CPPM-8U201 provides for On Screen Display (OSD) of the controls to adjust the display parameters such as brightness, contrast, etc. The display controller stores the settings in non-volatile memory so they are saved even when power is turned off or removed. To enter the OSD, press the front panel Menu/Select button. Then use the Left/Decrease and Right/Increase buttons to scan between each of the menu choices.
Chassis Plans CPPM-8U201 Technical Reference – ‘A’ & ‘D’ Controller Color Control Underlying menu to control the color balance of the display (aRGB only) User Bluish Reddish Underlying sub menu to control Red, Green and Blue Select to make the display ‘colder’ Select to make the display ‘warmer’ Position Underlying menus to control horizontal and vertical position of the display (aRGB only) H Position Underlying bar control to change the overall horizontal position of the image.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller ‘V’ Controller Description The ‘V’ controller applies to high end displays with aRGB, Digital DVI-D, Composite and S-Video inputs. The ‘A’ controller provides for only aRGB input while the ‘D’ controller provides for both aRGB and Digital DVI-D input. Users with the ‘A’ and ‘D’ controller should see the previous section for OSD menus. Front Panel Controls The On Screen Display (OSD) is adjusted as follows: 1. 2. 3. 4.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller Note – Pressing Source with the OSD displayed will over-ride the OSD and change the input source. Source scans, in order, aRGB, DVI-D, TV, CVBS, SVHS. It is normal for the display to hang in the SVHS mode while trying to change the source as the controller scans available SVHS modes. When a valid signal is detected, a small window above the source indicator will display the resolution, frequency, and controller mode.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller ‘V’ OSD The CPPM-8U201 provides for On Screen Display (OSD) of the controls to adjust the display parameters such as brightness, contrast, etc. The menus are context sensitive in that there are adjustments specifically for each Source Input type (analog aRGB, digital DVI-D, S-Video and Composite). This allows you to tune the display for each type of input without having to retune when changing the Source selection.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller A typical menu appears as follows: Display Menu Adjustment Brightness – Fine Brightness – Course Contrast Phase Frequency H Position V Position Sharpness Color Tint Brightness Contrast Phase Frequency H Position V Position Sharpness Color Tint aRGB ● ● ● ● ● ● ● Applicability DVI-D CVHS ● ● ● ● ● ● ● ● ● CVBS ● ● ● ● ● ● Top is Fine Adjustment and bottom is Course Adjustment. Adjusts the brightness of the screen.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller PIP Menu Adjustment Brightness Contrast Sharpness Color Tint PIP Source PIP Size PIP More Settings (sub menu) Brightness Contrast Sharpness Color Tint PIP Source PIP Size PIP More Settings aRGB ● ● ● ● ● ● ● ● Applicability DVI-D CVHS ● ● ● ● ● ● ● ● CVBS Adjusts the brightness of the PIP display. Adjust distinction (Image noise clearness). Adjusts the sharpness of the PIP display. Adjusts the display color saturation of the PIP display.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller OSD Menu Adjustment OSD Background OSD Time Out OSD Position Preset OSD H Position OSD V Position OSD Language Version 29A 1.00 OSD Background OSD Time Out OSD Position Preset OSD H Position OSD V Position OSD Language Version 29A 1.00 aRGB ● ● ● ● ● ● ● Applicability DVI-D CVHS ● ● ● ● ● ● ● ● ● ● ● ● ● ● CVBS ● ● ● ● ● ● ● Opaque or Translucent Sets the time (5 to 60 seconds) the OSD will be displayed without any user input.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller Misc Menu Adjustment Auto Adjustment Source Sleep Time Room Lighting Freeze Frame Zoom Settings (sub menu) More Options (sub menu) aRGB ● ● ● ● ● ● ● Applicability DVI-D CVHS ● ● ● ● ● ● ● ● ● ● ● CVBS ● ● ● ● ● Automatically adjusts the screen resolution and sync to the incoming signal. (aRGB Source Only) Source Selects the video input signal source (aRGB, DVI-D, S-Video, and Composite Video).
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller Misc. More Options Sub Menu Adjustment Color Temp Red Temp Green Temp Blue Temp Sharpness Filter Scale Mode Factory Reset Color temp User color Sharpness Filter Scale Mode aRGB ● ● ● ● ● ● ● Applicability DVI-D CVHS ● ● ● ● ● ● ● ● ● ● ● ● ● ● CVBS ● ● ● ● ● ● ● Adjust the Red/Green/Blue bias for Color Temperature (5500K, 7500K, 9300K and User). Default value is set at 7300K.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller Video Controller Details Features • State of the art high performance picture quality design • Analog RGB / DVI / CVBS (x1) & SVHS (x1) with NTSC, PAL, SECAM /Audio input (x3) / TV / Remote control / Speaker out (x1) • Optional input combination, e.g.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller Controller Block Diagram Page 20
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller Video Mode Support The CPPM-8U201 monitor can support any video mode within the following input constraints: • Signal sample frequency with the input ≤ 80kHz • Horizontal sync frequency between 30KHz and 60KHz. The modes are detected when presented to the input and previous alignments for setup are automatically recalled. A true multi-sync monitor emulation is implemented. The factory preset supported modes include: Notes: 1.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller SPECIFICATIONS ENCLOSURE 8U x 19" (wide) x 3" (deep) (Not including connectors) Weight: 30lbs Color: Powder coated black, light texture (Custom colors and logos available) DISPLAY LG.Phillips LM201U04 20.1" TFT LCD w/ antiglare hard coating Display area: 408mm x 306mm Display Colors: 16.7 Million Response Time: 16mS Viewing Angle: 89/89/89/89 deg Contrast Ratio: 500:1 typical Brightness: 250cd/m2 typical Pixel Pitch: 0.255mm x 0.
Chassis Plans CPPM-8U201 Technical Reference – ‘V’ Controller Connectors: aRGB: DVI-D: Composite: S-Video In: Audio In: Audio Out DC Power In: Touch Screen: 15-pin high density DB15 DVI-D 23-pin female BNC 4-Pin Mini Din RCA (x2) 3.5mm Stereo Jack, Female (x2) 2-Pin Power Plug DB9 or USB (depending on model) Power Consumption Normal: 60W (front LED Green) Power Input: 100-240VAC, 50/60Hz 1.
