User's Manual

12
Note:
1. This product has the function of maximum power point tracking (MPPT), which makes the
charging speed faster.
2. Please use the standard solar charging cable of this product. The charging port of this
product is DC7.9*0. 9. Using the unofficial standard solar charging cable may damage the
product.
3. The charging voltage range of the charging port of this product is 12-32V. Please do not
use solar panels beyond or below this voltage range to charge the product, so as to avoid
product damage or other unpredictable risks.
4. Charging with 200W solar panel, it takes about 6-10 hours from completely dead to full.
The above data are DEENO laboratory data.
5. When the sun is not strong enough, the charging power will decrease sharply and the
charging time will be prolonged; In cloudy or thunderous weather, please do not use solar
panels for charging.
4.3 On-board Charging
May Cause Use the car charging port to charge this product, this product supports 12V car
charging/24V car charging, the default charging current Is 8 A . Please use it after the car
starts Charge the car, so as not to cause the car battery to lose power and fail to start. At the
same time, ensure that the car is filled And the car charging input line Point Smoke device
contact is good. If the loss is caused by not operating according to the specifications, the
company will not bear the corresponding responsibility. ) ( Ben The default buzzer sound of
the product is on. If you need to cancel the buzzer sound, please press USB + POWER to turn
it off/on at the same time.