User's Manual

12. Battery fastener
13. Battery twistlock knob
Remote controller (CM2R3)
The Chasing M2 Pro remote controller had integrated communication and control. It connects directly to the
drone via the included tether and connects wirelessly to your mobile phone/tablet via Wi-Fi.And your mobile
phone/tablet also can be directly connected to the remote control through the data cable. It allows the drone to
display a live video feed on your phone/tablet, which enables users to control the drone in real-time. The
remote controller 's HDMI output can also be used to display a live video feed to a larger
screen.
1. Power switch: Turns controller on/off
2. Power Indicator: Green (High power), Blue (Medium power), Red (Low power)
3. WiFi switch button：Short press to switch 5Ghz/2.4Ghz WiFi
4. Signal Indicator：
a 2.4G：2.4Ghz Wi-Fi indicator，always on when working
b 5G：5Ghz Wi-Fi indicator，always on when working.
c ROV(drone)：Indicates the communication status between the controller and the drone (Steady light indicates successful
connection; Blinking light indicates disconnection.)
5. One-key reset：Short press to reposition the ROV return to a horizontal state/ Long press to switch control mode
6.
Unlock：Unlock/Lock，current state of the Thruster will show on the APP
7. Led Control：On / off led light (third gear)
8. Safety Buckle：Can be used with a safety rope to prevent the remote control from falling
9. Control Sticks：Used to control the navigation of the ROV.
10. Robotic Arm Control：Short press to close and stop, long press for one second to open
11. Photo/Video：Short press to take photos, long press to start / end recording video
12. Right Angel Adjustment：Adjust the rollover angle
13. Left Angel Adjustment：Adjust the pitch angle