User's Manual

Installation & Connection
1. Download CHASING GO1 App
CHASING GO1 App ：Scan the following QR code or visit the IOS APP Store/Google Play/Chasing website for downloading. (For
IOS 9.0 or later/Android version 4.4 or later）
2. Connect ROV with Remote Controller
a. Insert o
ne end of the tether connector into the remote controller connector socket.
b. Reserve a suitable length and hang the
Buckle on the Buckle Bracket, and make it tension.
c. Insert the other end of the tether connector to the ROV.
d.
Sec
urel
y hand-tighten both connectors.
War
ning: Check whether the O-ring on the tether connector pre-dive. If it is missed or damaged, please replace it in time.
3. Start (turn on) the ROV
a Turn on th
e remote controller power button.
b. A few seconds later, the remote controller’s indicator lights up, 5G or 2.4G light will be always on. The drone LED lights
will flash shortly, accompanied by two self-tests sounds.
c. Check all the connectors and lights pre-dive, and unlock the ROV when everything is ready underwater.
4. Wi-Fi Connection
a. On the
Phone/Tablet, go to Wi-Fi settings.