User's Manual

Note: Do not put the controller in the water to avoid damaging the device, damages caused by water ingress are not covered by the
warranty.
Handle indicators introduction
Battery：
Red：10%↓ Red light flashes quickly；10-19% Red light flashes slowly；20-29% Red light always on.
Yellow：30-69% Yellow light always on；
Green：70-100% Green light always on;
Signal Indicator
a 2.4G：2.4Ghz Wi-Fi indicator，always on when working.
b 5G：5Ghz Wi-Fi indicator，always on when working.
c ROV：Indicates the communication status between the controller and the ROV (Steady light indicates successful connection,
Blinking light indicates disconnection.)
Gesture back Button：
The blue light is always on when the ROV is in a non-horizontal position
Unlock Button：
Locking: No lights
Unlocking: Blue light on
Led Control Button：
Bright light：Blue light always on;
Low light: Blue light flash;
No light: Blue light off.
100/200 meters Tether & Winder
The tether is used to connect the drone and the remote controller
The winder is used to store the tether.
1. Tether connectors
2. Tether
3. Winder
4. Fastener
Warning：
a. Do not put exposed (unconnected) tether into the water or plashing liquid to the tether.
b. C
heck whether the O-ring on the tether connector pre-dive, make a replacement when it is missed or damag
ed.