User's Manual

Remote controller
The Chasing M2 remote controller had integrated communication and control. It connects directly to the drone
via the included tether and connects wirelessly to your mobile phone/tablet via Wi-Fi. It allows the drone to
display a live video feed on your phone/tablet, which enables users to control the drone in real-time. The base
station's HDMI output can also be used to display a live video feed to a larger screen.
1. Power swi
tch: Turns controller on/off
2.Power Indicator: Green (High power), Blue (Medium power), Red (Low power)
3.Signal Indicator：
a 2.4G：2.4Ghz Wi-Fi indicator，always on when working
b 5G：5Ghz Wi-Fi indicator，always on when working.
c ROV(drone)：Indicates the communication status between the controller and the drone (Steady light indicates successful
connection; Blinking light indicates disconnection.)
4.
Unlock：Unlock/Lock，current state of the Thruster will show on the APP
5. Gesture back：ROV
can be returned to a horizontal state
6. Led Control：On / off led light (third gear)
7. Safety Buckle：Can be used with a safety rope to prevent the remote control from falling
8. Control Sticks：Used to control the navigation of the ROV.
9. Phone/Tablet Clamp：Used to attach phone/tablet mount to mounting bracket.
10. Clamp Button：Pull apart the two ends and put in the phone/tablet, then press this button to tighten.
11. Robotic Arm Control：Short press to close and stop, long press for one second to open
12. Photo/Video：Short press to take photos, long press to start / end recording video
13. Left Angel Adjustment：Adjust the pitch angle
14. Right Angel Adjustment：Adjust the rollover angle
15. HDMI Socket：1080P HD image real-time output
16. Tether Connection Socket/Charging socket.