User Instructions

to indicate that the light is on, click again, the icon darkens and the light is off.
2） Picture and video
Photos can be taken while recording
3） Wind-up and Wind-down
Manual
The speed of the probe releasing and retracting can be controlled by adjusting the
slider, more closer to the end of sides, more faster.
Wind-up：Slide up and press long, release to stop
Wind-down: Slide down and press long, release to stop
Auto
When the auto retracting and releasing button is clicked, the manual icon will be
changed into the speed adjustment icon, and the speed can be adjusted by sliding slider.
Wind-up: Click the probe retracting slider, click again to stop
Wind-down: Click the probe releasing slider, click again to stop
Note：
When the wire retracting is nearly completed, please pay attention to adjust the
speed to a slow speed to avoid damage to the probe or the cable;
Do not release or retract the probe before the watercraft get into the water.
4） Unlock the motor
Click the icon in the lower left corner to unlock or lock the motor when use.