User guide

Windows Peer-to-Peer - NetBEUI
Page 96
Chapter 2 Installation and Configuration
8. Install the correct printer for each port. When prompted with the following screen, ensure
that you select the port to which the printer is connected.
Configuration is now complete; you can now print using the printers attached to the
IOPRINT+ Print Server.
Windows NT 4.0
The setup program will do the following:
• Create the following icons: Readme and UnInstall.
• Add the driver, prtserv.dll, to the Windows\System32 directory.
• Add the Uninstall program to the Windows directory.
• Add Uninstall information files and the Readme file to the installation directory.
Before proceeding, check the following:
* IOPRINT+ Print Server is installed, and ON.
* Printer(s) connected to the IOPRINT+ Print Server, and on-line.
* LAN is operational and using the NetBEUI protocol.
To run the SETUP program proceed as follows;
1. Run the SETUP program in the Driver\ptp_95nt folder on the CD-ROM.
2. At the Select Components window, select the NetBeui protocol.
3. The Configure Print Server window, like the example below, will appear.