User guide

Windows Peer-to-Peer - NetBEUI
Page 95
Chapter 2 Installation and Configuration
Installing Additional Ports on Multi-port models
If you are installing a multiple port IOPRINT+ Print Server, you must add additional ports and
printers. To do so, use the following procedure.
1. Go to the Printers folder and click on the printer just added. Then select File-Properties.
The Properties screen will appear.
2. Select the Details tab and the following screen will appear:
3. Select Add Port to see the following Add Port screen:
4. Select Other as the type of port you want to add and select the IOPRINT+ Print Server's
port. (PrintServer is used in the example above.)
5. Then click OK and the Configure PrintServer window will appear.
6. Enter the configuration information as for the first port. Ensure that you select a different
IOPRINT+ Print Server port each time, and assign a unique name to that port (e.g.
pserv_2 for parallel port 2).
7. Repeat steps 3. to 6. until all IOPRINT+ Print Server ports have been added.