User guide

Windows Peer-to-Peer - NetBEUI
Page 94
Chapter 2 Installation and Configuration
3. Configure the Printer to use this new port:
a. Go to Start-Settings-Printers. Invoke the Add Printer Wizard.
b. Select the Local printer option.
c. Choose the Printer which is attached to the first port on the IOPRINT+ Print Server.
d. In the Available Ports screen, shown below, select the Port Name (from step 3) as
the port to use.
e. If you click the Configure Port button, the Configure Print Server screen appears.
4. Follow the on-screen instructions to finish adding a printer as normal.
5. You can now print using this printer.
Item Description
Device Name Click Browse and select the correct IOPRINT+ Print Server. The
name shown will be in the form SCxxxxxx (SC followed by 6 digits),
as shown on a label on the base of the IOPRINT+ Print Server. The
name can be changed if you wish, but it is only visible when
configuring the device.
Select Device Port Select the IOPRINT+ Print Server port that the printer is connected
to (e.g. Parallel port 1).
Port Name On multi-port devices, each port must have a unique name (8
alpha-numeric characters). The Port Name will be shown in the
Printer's properties. Use a name which indicates the port used (e.g.
Par_1)
Enable Banner Select this option to enable a banner page.
PostScript If using a PostScript Printer, check this box.
User Name The name to be printed on the banner page.
Retry Interval Sets how often Windows will poll the IOPRINT+ Print Server to
establish a connection when the printer is busy. Values range from
40-110 seconds.