User guide

Windows NT Server (TCP/IP)
Page 81
Chapter 2 Installation and Configuration
Other configuration settings
When assigning the IP Addresses, you should also check the following configuration
settings.
Serial Port Setup (if exists)
Device Name The default name will be in the form SCxxxxxx (SC followed by 6 numbers).
This can be changed. The new name MUST NOT exceed 19 characters, nor
include any spaces.
TCP Session
Retry Interval
Sets how long the IOPRINT+ Print Server should wait before retrying a TCP/IP
connection which is lost.
Allowable values are from 0 to 255 seconds, with 2 as the default.
TCP Session
Retry Count
Sets how many attempts at reconnection will be made. After that, the TCP/IP
session will be terminated.
Allowable values are from 0 to 255, with 254 as the default.
Baud Rate (bps) Allowable values are 300, 600, 1200, 2400, 4800, 9600, 19200, 38400
Stop bits Allowable values are 1 or 2
Parity Allowable values are NONE, ODD, EVEN
Data bits Allowable values are 7 or 8
Handshake Allowable values are NONE, HARDWARE, XON/XOFF, BOTH