User guide

Windows NT Server (TCP/IP)
Page 79
Chapter 2 Installation and Configuration
Software requirements
• Windows NT3.51 or later
• TCP/IP network protocol
• TCP/IP remote printing system (provided with Windows NT; configuration is described in
this chapter).
Device configuration
Configuration of your IOPRINT+ Print Server can be done by any of the following methods.
Follow each link for more details.
Note:
The device should be configured FIRST.
Method Description
BiAdmin This is the recommended program for configuration and
management of the IOPRINT+ Print Server. It is used by the main
SETUP program on the CD-ROM, and can also be installed
using SETUP. BiAdmin requires Window 95/98 or Windows NT.
BiAdmin can be used to assign an IP Address to the IOPRINT+
Print Server.
See Appendix A BiAdmin Management Program.
FTP Command-line FTP (File Transfer Protocol) clients are supported.
FTP can be used to assign an IP Address to the IOPRINT+ Print
Server, provided that the Windows NT Host Configuration has
been completed.
See Appendix H FTP (File Transfer Protocol).
WebAdmin This runs on an NT Server and is accessed by a WEB browser.
Details on installing and using this program are in this document.
See Appendix C WebAdmin.
Web Browser 100BaseT models incorporate a HTTP server, allowing
configuration with a Web Browser.
This method can be used to assign an IP Address to the
IOPRINT+ Print Server, provided that the Windows NT Host
Configuration has been completed.
See Appendix D Web Browser configuration.