User guide

NetWare configuration
Page 75
Chapter 2 Installation and Configuration
Configuring the IOPRINT+ Print Server
On the IOPRINT+ Print Server, logical Printers are numbered from L1 to L3 for models with a
single parallel port, and L1 to L8 for other models).
The IOPRINT+ Print Server requires the following data, if logical printers are going to be
used.
Item Description
Physical Port Select the physical port for this Logical Printer (P1 to P3 for parallel
ports, SP for the serial port).
String Before Job The printer control string (in Hex) to be sent to the printer before
each print job.
String After Job The printer control string (in Hex) to be sent to the printer after each
print job.
Convert LF to CR+LF If ON, LF (line feed) characters are changed to CR+LF (carriage
return + line feed). If OFF, no conversion is done.