User guide

NetWare configuration
Page 73
Chapter 2 Installation and Configuration
Configuration Data - NDPS (NetWare 5)
If using DNPS (Novell Distributed Printing Services), the IOPRINT+ Print Server must be
configured for use in a TCP/IP environment. The following information is required.
Parameter Details
IP Address The IOPRINT+ Print Server must have a valid IP
Address.
The IP Address can be obtained dynamically, using
DHCP, or use a static IP Address which your assign.
Using a static address is more common.
Because of the support for dynamic IP Addresses, the
IOPRINT+ Print Server ships with an IP Address of
0.0.0.0.
Gateway Address If your network segment has a router, enter the router
address. If there is no router, leave the address as
0.0.0.0.
Subnet Mask If the Gateway Address above is 0.0.0.0 the Subnet
Mask should also be left at 0.0.0.0.
If you have a router, enter the Subnet mask for the
segment to which the IOPRINT+ Print Server is
attached.
TCP Session Retry Interval Sets how long the IOPRINT+ Print Server should wait
before retrying a TCP/IP connection which is lost.
Allowable values are from 0 to 255 seconds, with 2 as
the default.
TCP Session Retry Count Sets how many attempts at reconnection will be made.
After that, the TCP/IP session will be terminated.
Allowable values are from 0 to 255, with 254 as the
default.