User guide

NetWare configuration
Page 71
Chapter 2 Installation and Configuration
Configuration Data - NDS & Bindery
The IOPRINT+ Print Server requires the following "General" data, and the data for the mode (Print
Server or Remote Printer) you are using.
This section includes the following:
• General on page 71
• Novell Remote Printer Mode on page 71
• Novell Print Server Mode on page 72
General
Novell Remote Printer Mode
Item Description
Device Name The default name is shown on a sticker on the base of the device, in the
form SCxxxxxx (SC followed by 6 digits). Change this if you wish. The
new name MUST NOT exceed 19 characters, nor contain any spaces.
Device Password Default is NULL (no password).
NetWare Mode Print Server or Remote Printer.
Frame Type Select the frame types used by your network. (Ethernet 802.2, Ethernet
802.3, Ethernet SNAP, and Ethernet II) By default, all frame types are
enabled.
Item Description
Novell Printer Server for P1 NetWare print server to service
the IOPRINT+ Print Server's
parallel port 1
Novell Printer Server for P2, P3 & SP
(if exist)
NetWare print server to service
the IOPRINT+ Print Server's
parallel port 2 (P2), parallel port
3 (P3), or Serial port (SP), if
fitted.