User guide

Unix - TCP/IP
Page 48
Chapter 2 Installation and Configuration
Other Configuration Settings
When assigning the IP Addresses, you should also check the following configuration
settings.
Serial Port Setup
(if exists)
Item Description
Device Name
(0001 BOX_NAME)
The default name will be in the form SCxxxxxx (SC
followed by 6 numbers). This can be changed. The new
name MUST NOT exceed 19 characters, nor include any
spaces.
TCP Session Retry Interval
(4010 TCP_INT)
Sets how long the IOPRINT+ Print Server should wait
before retrying a TCP/IP connection which is lost.
Allowable values are from 0 to 255 seconds, with 2 as the
default.
TCP Session Retry Count
(4011 TCP_CNT)
Sets how many attempts at reconnection will be made.
After that, the TCP/IP session will be terminated.
Allowable values are from 0 to 255, with 254 as the
default.
Item Description
Baud Rate (bps)
(0030
BAUDRATE)
Allowable values are 300, 600, 1200, 2400, 4800,
9600, 19200, 38400
Stop bits
(0031 STOPBITS)
Allowable values are 1 or 2
Parity
(0032 PARITY)
Allowable values are NONE, ODD, EVEN
Data bits
(0033 DATABITS)
Allowable values are 7 or 8
Handshake
(0034
HANDSHAK)
Allowable values are NONE, HARDWARE, XON/
XOFF, BOTH