User guide

Unix - TCP/IP
Page 46
Chapter 2 Installation and Configuration
Software Requirements
• TCP/IP protocol, FTP (Optional: - BOOTP, Rarp, Telnet)
• LPD printing system (for LPD printing)
• C Compiler (for PSfilter proprietary printing system only).
Device Configuration
Configuration of your IOPRINT+ Print Server can be done by any of the following methods.
Follow each link for more details.
Method Description
BiAdmin This is the recommended program for configuration and
management of the IOPRINT+ Print Server. It is used by the
main SETUP program on the CD-ROM, and can also be
installed using SETUP. BiAdmin requires Window 95/98 or
Windows NT.
BiAdmin can be used to assign an IP Address to the
IOPRINT+ Print Server.
See Appendix A BiAdmin Management Program.
FTP Command-line FTP (File Transfer Protocol) clients are
supported.
FTP can be used to assign an IP Address to the IOPRINT+
Print Server, provided that the procedures in Unix Host
Configuration on page 51 have been completed.
See Appendix H FTP (File Transfer Protocol).
Web Browser 100BaseT models incorporate a HTTP server, allowing
configuration with a Web Browser.
This method can be used to assign an IP Address to the
IOPRINT+ Print Server, provided that the procedures in Unix
Host Configuration on page 51 have been completed.
See Appendix D Web Browser configuration.