User guide

AppleTalk Configuration
Page 44
Chapter 2 Installation and Configuration
3101 AP_PCOMM1: No
3102 AP_PCOMM2: No
3103 AP_PCOMM3: No
3104 AP_PCOMM4: No
These settings determine whether the port uses ASCII or
Binary Communication Protocol. Enter NO for ASCII or
YES for Binary. The lines refer to the following ports.
3101 AP_PCOMM1: Parallel Port 1
3102 AP_PCOMM2: Parallel Port 2
3103 AP_PCOMM3:Serial Port
3104 AP_PCOMM4: Parallel Port 3
In choosing which Protocol to use, consider the following
points.
Binary communication is twice as fast as ASCII
ASCII communication is more reliable
The computer, IOPRINT+ Print Server and printer MUST
all be configured to use the SAME protocol. Check your
printer manual for details of printer configuration, and use
the Print menu to configure your computer, so that they
use the same settings as the IOPRINT+ Print Server.
Serial Port Configuration Check your serial device to see what settings should be
used. The following options are available.
Setting Options
0030 Baud Rate
300, 600, 1200, 2400, 4800, 9600, 19200, 38400 (bps)
0031 Stop Bits
1 or 2.
0032 Parity
None, Odd, Even.
0033 Data Bits
7 or 8.
0034 Handshake
Hardware, XON/XOFF, None, Both (Hardware & XON/
XOFF)
Parameter Details