User guide

AppleTalk Configuration
Page 43
Chapter 2 Installation and Configuration
AppleTalk Settings
When editing the CONFIG file, only the parameter should be changed. The parameter is the
last part of the line, after the colon (:). Ensure that you use only valid parameters.
Parameter Details
0001 Device Name:
SCxxxxxx
The default name will be in the form SC followed by 6
digits. This can be changed, but the new name MUST
NOT exceed 19 characters in length.
3000 Apple Zone: * The default value "*" allows all AppleTalk zones to access
the IOPRINT+ Print Server's printers. To restrict access to
a particular zone, enter the zone name here.
3001 Printer Type (P1):
LaserWriter
3002 Printer Type (P2)
LaserWriter
3003 Printer Type (SP):
LaserWriter
3004 Printer Type (P3)
LaserWriter
These are text fields, used to describe the printer driver
used for each port. P1, P2, P3 refer to the parallel ports,
while SP refers to the Serial Port The name can be up to
19 characters long.