User guide

AppleTalk Configuration
Page 40
Chapter 2 Installation and Configuration
Software Requirements
System 7.x OS or newer.
AppleTalk Setup
1. Click the apple icon and choose Control Panel.
2. Click Network.
3. Ensure that EtherTalk is selected under AppleTalk Connection.
4. Click Chooser. The Chooser panel will open.
5. Click on either the LaserWriter 8 icon (recommended) or the LaserWriter 7 icon.
LaserWriter 8 makes use of the fonts installed in the printer itself, so the printing response
time is quicker. LaserWriter 7 uses the fonts installed in the computer, which increases
network traffic and takes more printing time.
6. Select a IOPRINT+ Print Server from the printer list by clicking on the appropriate name.
The IOPRINT+ Print Server's name will appear in the form of SCxxxxxx, (SC followed by
6 digits) which is recorded on the bar code label on the bottom of the IOPRINT+ Print
Server.
7. Click on the Close box.
Configuration is now complete.