User guide

General Device Settings
Page 38
Chapter 2 Installation and Configuration
General Device Settings
The following configuration settings and operations are available regardless of which
Network protocol or operating system is being used.
• Get IOPRINT+ Print Server status and existing settings
• Reset (reboot) the IOPRINT+ Print Server
• Restore Default Configuration settings
• Change the device name.
• Change the device password.
• Disable/Enable network protocols.
• Get Printer Status (idle, off-line, printing)
• Set Serial port configuration (if the serial port exists):
Baud rate
Handshake protocol
Stop bits
Data bits
Parity.
As well, there are specific settings for each supported platform. These settings are detailed in
the documentation for each platform.