User guide

Management
Page 36
Chapter 2 Installation and Configuration
Management
Following initial configuration, the following management programs or methods can be used
to monitor and manage the IOPRINT+ Print Server and the printers attached to it.
Click the appropriate link for more information.
Method Platform Details
BiAdmin Windows 95/98/NT
(IPX/SPX, TCP/IP, NetBEUI)
Recommended program; supports all IOPRINT+ Print Server
features.
See Appendix A BiAdmin Management Program.
FTP All TCP/IP networks Using this method, the configuration file is down loaded from
the IOPRINT+ Print Server, edited, then sent back.
See Appendix H FTP (File Transfer Protocol).
JetAdmin
(HP)
(100BaseT
models
only)
Windows 95/98/NT This program is not supplied, but 100BaseT models are
compatible with it. You can use this program to manage
100BaseT IOPRINT+ Print Servers and the attached printers.
PSTool AppleTalk (EtherTalk) Not required for basic operation.
See AppleTalk Configuration.
PSConfig DOS (IPX/SPX) Menu-based DOS program for NetWare users.
See Appendix B PSConfig.
Tel net All TCP/IP networks Telnet can be used only to monitor the printers attached to the
IOPRINT+ Print Server.
See Unix - TCP/IP on page 45
or Windows NT 4.0 on page 96.
WebAdmin Windows NT Server,
Web Browser client
(TCP/IP)
WebAdmin is installed on the NT Server, and then accessed
using a Web Browser.
See Appendix C WebAdmin.
Web
Browser
All TCP/IP networks Only available on 100BaseT models.
Printer Configuration is not supported.
WPConfig Windows 3.1
(IPX/SPX, TCP/IP, NetBEUI)
Not all IOPRINT+ Print Server features are available.