User guide

IOPRINT+ Print Servers User guide
Printing problems
Page 289
My IOPRINT+ Print Server is
configured as a Novell
Remote Printer, and can't log
in to the Novell Print Server.
Try the following steps.
1. Get the IOPRINT+ Print Server information as described above.
2. Check the fields after "Remote Printer Mode Status":
3. For each logical printer, there will be a status entry. The status
will be one of the following.
Connected:
No action required
Unable to find server:
Load NetWare Print Server.
Connecting to Server:
Wait and check if the NetWare Print server is loaded
Printer not Defined:
Install the IOPRINT+ Print Server as a remote printer of a
NetWare print server.
4. Check NetWare to see if the Print Server is ready. If it is not,
check the error message and perform the required corrective
action.
5. Check the NetWare print server's name. If it is over 20
characters, rename the NetWare Print Server name using no
more than 20 characters.
Problem Solution