User guide

IOPRINT+ Print Servers User guide
Printing problems
Page 287
Problem Solution
My IOPRINT+ Print Server does not
appear in the Active Device List of
the PSCONFIG program.
Ensure that the IOPRINT+ Print Server
is on the same network segment as
your PC.
Load the NetBEUI protocol on your
PC, so that PSCONFIG can try
connecting using NetBEUI. Once
connected, check the following:
The NetWare protocol is enabled.
The Ethernet frame type of your PC
may be different than the one with your
IOPRINT+ Print Server. Enable all
Ethernet frame types.