User guide

IOPRINT+ Print Servers User guide
Printing problems
Page 285
Printing - NetWare
Problem Solution
My IOPRINT+ Print Server
prints garbage.
Follow the following steps to identify the problem:
1. Print a diagnostic file using PSCONFIG program.
2. Run PSCONFIG and select your IOPRINT+ Print
Server from the list. Then select Print Diagnostic
Report
3. Select each port in turn and print a diagnostic report.
4. Check to see if the diagnostic report printed OK. If
the diagnostic report printed OK, the problem may
be caused by incorrect system configuration. If the
diagnostic report printout is not OK, check your
printer. If your printer is OK, call your dealer.
5. Print a test text file and a test graphic file. If the text
file prints correctly but the graphic file prints
garbage, then specify /NT (no tabs) option for
NPRINT or CAPTURE commands and print again. If
both print incorrectly proceed to the next step.
Continues on next page.......