User guide

IOPRINT+ Print Servers User guide
Printing problems
Page 278
Printing - AppleTalk
Note
For information on using the laserwriter 8.1.1 driver, see Using the
LaserWriter 8.1.1 Driver on page 281.
Problem Solution
Why do I get an incorrect printout? Some possible reasons are listed as
follows:
You may have chosen Binary
encoding to print the file. Try to use
ASCII encoding.
Some of the fonts in your print file may
not be supported by the printer. Try
selecting LaserWriter 7 instead of
LaserWriter 8.
Can't find the IOPRINT+ Print Server's
name in the Chooser.
Try the following:
1. Make sure that AppleTalk is on
(the button next to Active is
highlighted in the Chooser).
2. Make sure the printer has been
on and in the READY state for a
few minutes.
3. Make sure the printer has not
been renamed since its last
appearance in the Chooser.
4. If the printer resides on a
network with multiple zones,
make sure the correct zone is
selected from the AppleTalk
Zones box in the Chooser.