User guide

IOPRINT+ Print Servers User guide
Printing problems
Page 277
Printing - General
Problem Solution
When using 10BaseT cabling, the
IOPRINT+ Print Server unit does not
work.
Check the Hub's link LED for the port to which the
IOPRINT+ Print Server is connected. If it is off, there
is a problem in the network cable. If using 10BaseT or
100BaseT, check the LED next to the connector. It
should be on if the network connection is OK.
A printing device connected to the a
IOPRINT+ Print Server port cannot
print or prints garbage.
Check the following:
• Cable connection between IOPRINT+ Print
Server and printer.
• Serial port configuration, if a serial device.
• Printer driver in the application program or
Windows matches the printer.
The Configuration button on the
Printer Status screen in BiAdmin is
greyed out, even though my printer in
bi-directional.
The button is unavailable if the printer is busy. You
must wait until the printer is idle.