User guide

IOPRINT+ Print Servers User guide
Hardware Problems
Page 275
Hardware Problems
Problem Solution
All the IOPRINT+ Print Server's
LEDs are off.
Check the power supply or power connection.
IOPRINT+ Print Server's status
light continuously stays lit.
Reset IOPRINT+ Print Server by unplugging the
power supply and plugging it back in.
IOPRINT+ Print Server status
light and power light stays on
continuously and do not turn
off.
Reset IOPRINT+ Print Server by unplugging the
power supply or by pushing the reset push button.
I am using DHCP, and getting an
IP Address conflict involving
the IOPRINT+ Print Server.
If the IOPRINT+ Print Server is left on, but the DHCP
server is turned off, then the IOPRINT+ Print Server
will retain its IP Address without the DHCP Server
being aware of it. Simply reset the IOPRINT+ Print
Server so it will obtain a new IP Address.
This problem would also arise if you assigned a static
IP Address which is within the range used by the
DHCP server.
If so, use another address which is NOT within the
range used by the DHCP server.
I am using WPConfig on
Windows 95, and having
problems configuring the
IOPRINT+ Print Server.
WPConfig is designed for Windows 3.1 only. For
Windows 95/NT, you should use BiAdmin.