User guide

IOPRINT+ Print Servers

IOPRINT+ Print Server MIB

Page 260

PSNetwareConfig group

LP8PostString The string sent to logical printer 8 whenever the job ends.

LP8LFChange Convert LF to LF+CR Status.

Object Description

FrameethernetIIEnable EthernetII frame Type Status

Frame802-2Enable Ethernet 802.2 frame Type Status

Frame802-3Enable Ethernet 802.3 frame Type Status

FrameSnapEnable Ethernet 802.2 SNAP frame Type Status

OperationMode The current Netware operation mode. PS: PrintServer mode, RP: Remote

Printer mode.

MasterFileSrvrName The name of the File Server that the device will connect to First. The

master file server contains all the information that the device needs,

including a list of all other file servers to be serviced. (Netware 2.x, 3.x)

NDSTreeName The NDS Tree Name for Netware Print server to login into. (Netware 4.x)

NDSContext The NDS context where the print server's object belongs.

NetwareQPollingInterval The Netware Print Server Polling Interval. The range is 1-255 minutes.

JobNotifyByConnID When the job ends, Print will notify the user by the connection ID.

NetwarePrintServerP1 The Netware Print Server to connect to for parallel port 1, when the device

is operating as a remote printer.

NetwarePrintServerP2 The Netware Print Server to connect to for parallel port 2, when the device

is operating as a remote printer.

NetwarePrintServerP3 The Netware Print Server to connect to for parallel port 2, when the device

is operating as a remote printer.

NetwarePrintServerSP The Netware Print Server to connect to for the serial port, when the device

is operating as a remote printer.