User guide

IOPRINT+ Print Servers
Using the new Port
Page 244
Using the new Port
The Windows Control Panel is used to connect the correct printer to the InterNet Printing
Port. In Windows 95/NT, the procedure is:
1. Select the Printer which matches the remote printer, then choose Properties, as shown in
the example below.
2. Select the new port - WAN (InterNet Printer) in the example - as the port for this printer.
3. If you do not have the correct printer driver, or you wish to create another printer using an
existing driver, use the Windows Add Printer facility.
4. Using the Windows Port Settings or Configure Port facility will reveal the same Configure
Port screen shown in InterNet Printer Port.
5. If you wish to print to multiple Internet Printers, use the Windows Add Port facility to add a
new InterNet Printer port. Ensure that the correct data is entered in each port, and that
each port has a unique name.